reComputer R1025-10 Raspberry Pi Gateway Edge IoT Controller 4GB RAM, 32GB eMMC

The reComputer R1000 is a high-performance and cost-effective edge loT controller based on Raspberry Pi solution. It features dual Ethernet interfaces and three isolated RS485 interfaces, supporting Modbus UDP/TCP and BACnet protocols, which makes it a perfect fit for smart building and energy management, such as controlling HVAC systems and other subsystems like lighting, sensors, and access control. With powerful loT expansion capabilities, reComputer R1000 is integrated with various wireless transmission capabilities such as 4G, LoRa®, Zigbee, Wi-Fi, and BLE through internal slot

Feature :

• Powerful Performance: Raspberry Pi CM4, quad-core A72, 4GB RAM and 32GB eMMC
• Multiple Industrial Interfaces: 3x RS485, 2x Ethernet Ports, 1x HDMI, 3x USB2.0
• Versatile Wireless Options: Support Wi-Fi, BLE, LoRaWAN®, Zigbee, 4G LTE
• Perfect Fit for Building Automation System: Support BACnet & Modbus Protocols to ensure interoperability
• Safety and Reliablity: Hardware Watch Dog, UPS, EMC protection, TPM2.0/ATECC608A

Application :

• Smart building solutions: intelligent building automation solution, facility management, building maintenance, building automation and control system
• Smart energy management system: lighting system, energy management and control system
• HVAC control: heating system, cooling system, ventilation system
• Remote device management: water monitoring and control, intelligent fire detection, access control system

Specification:
Hardware Spec:

• Model : R1025-10
• CPU : Raspberry Pi CM4, Quad-core Cortex-A72@ 1.5GHz
• Operating System : Raspbian, Debian
• RAM : 4GB
• eMMC : 32GB

System Spec:

• Input : 2-pin Terminal Block
• PoE(as powered device) : IEEE 802.3af Standard 12.95W PoE*
• Supply Voltage (AC/DC) :12~24V AC/9~36V DC
• Overvoltage Protection : 40V
• Power Consumption : Idle:2.88W; Full Load:5.52W
• Power Switch : No
• Reboot Switch : Yes

Interface:

• Ethernet : 1 x 10/100/1000 Mbps (supports PoE*) | 1 x 10/100 Mbps IEEE802.3/802.3u
• USB : 2 x USB-A 2.0 Host | 1 x USB-C 2.0 (For flashing OS)
• RS485 : 3 x 3-pin Terminal Block (isolated)
• SIM Card Slot : supports Standard SIM Card
• M.2 Slot : supports M.2 NVMe SSD
• LED : 6 x LED indicators
• Buzzer : 1
• Reset Button : 1
• HDMI : 1 x HDMI 2.0

Wireless Communication :

• Wi-Fi 2.4/5.0 GHz : YES
• BLE 5.0 : YES
• LoRa® : USB LoRa®*/SPI LoRa®*
• 4G Cellular : 4G LTE*
• Zigbee : USB Zigbee*

Standards :

• EMC : ESD: EN61000-4-2, Level 3 | EFT: EN61000-4-4, Level 2 | Surge: EN61000-4-5, Level 2
• Certification : CE, FCC | TELEC | RoHS

Ambient Conditions :

• Ingress Protection : IP40
• Operating Temperature : -30~70 °C
• Operating Humidity : 10~95% RH
• Storage Temperature :-40~80 °C

Others :

• Supercapacitor UPS : SuperCAP UPS LTC3350 Module*
• Hardware Watchdog : 1~255s
• RTC : High Accuracy RTC
• Security : Encryption Chip TPM 2.0* | ATECC608A
• Heat Dissipation : Fanless

Part List : 

• reComputer R1025 x 1
• DIN-rail clip x 1
• Screw Pack x 1
• DC Power Female Jack to Screw Terminal Adapter x 1
• 3-pin Terminal Block Connector(Male) x 3
• 120Ω Resistor x 5
• User Manual x 1

Documentations :
User Manual
reComputer R1000 3D File
reComputer R1000 Schematic Design, PCB Design
reComputer R1000 Flyer
reComputer R1000 Getting StartedreComputer R1000 Raspbian OS to eMMC
ReComputer R1000 Assembly Guide
reComputer R1000 with balena
recomputer R1000 with Node-Red and BACnet IP